Simon Neil tosses guitar to Richard Pratt, Credit - Carla Mundy

Behind the Board:Richard PrattとThe Prodigy、RAYE、Biffy Clyro

エフェクター愛好家がコンパクト・エフェクターを扱うための特別なヒントを教えてくれました。プロがどのようにして世界に通用するギターの音色を作り上げるのか、見ていきましょう。 Header photo by Carla Mundy, all other photos Richard Pratt

イングランド北西部プレストン出身のRichard Prattは、その類まれな技術力をイギリスのトップ・アーティストたちに共有してきました。20年以上にわたりライブ音楽の最前線で活躍してきた彼は、RAYE、Biffy Clyro、Kasabian、Oceansize、Cat Burns、Sugababes、Stormzy、Daveといった数多くの一流アーティストたちと仕事をしています。最近では、UKグライム・アーティストのStormzyや、受賞歴のある英国人ラッパーDaveのショーを手掛けました。今年の夏は、The Prodigyとのツアーを予定しています。

ロック、ダンス、ラップ、ポップ——どんなジャンルのライブでも、BOSSのペダルはステージ上に欠かせません。自他ともに認めるペダルの愛好家Prattは、ツアーに出ていないときは、自宅で半田こてを手にコンパクト・エフェクターを制作しています。本格的なブティック・スタイルで、彼はGone Fishing Effectsというブランド名で小規模でありながら非常にコレクターズ・アイテムとなるペダルを製作しています。彼の手作りペダルには、KasabianのSergio PizzornoやBiffy ClyroのSimon Neilといったアーティスト向けの貴重なシグネチャー・モデルも含まれています。

Richard Pratt

ツアーを通じて

ギター技術者としてのキャリアはどのように始まりましたか?

90年代後半から2000年代前半にかけて、姉のバンドFi-Lo Radioが勢いを増していました。そこで私はツアーに同行して、バンを運転し、グッズ販売の仕事をすることにしました。Fi-Lo RadioはイギリスでのツアーでOceansizeのサポート、その後にはOceansizeと一緒にヨーロッパを回っています。また、Biffy Clyroのサポート・バンドを務めていたこともあり、その時私はBiffyに仕事をくれるよう懇願しました。そして願いが叶ったんです。

「姉のバンドFi-Lo Radioが勢いを増していました。そこで私はツアーに同行して、バンを運転し、グッズ販売の仕事をすることにしました」

Stormzyのペダルボード

Stormzyのベーシスト、Levi YardeのペダルボードにはどのBOSSが搭載されていますか?

Leviのペダルボードは全てBOSS製です。OC-5 Octave、BB-1X Bass Driver、BC-1X Bass Comp、NS-2 Noise Suppressor、LS-2 Line Selector、TU-3W Chromatic Tuner、MS-3 Multi Effects Switcherを使用しています。その構成はシンプルで、Leviはいつでも確実に動作することにはとても信頼しています。最近では、O2アリーナでの3夜連続公演でも使用されました。また、SugababesのベーシストであるArran Powellも、ほぼ同じペダルボードを使用しています。

Stormzy bassist Levi Yarde’s pedalboard
Stormzy bassist Levi Yarde’s pedalboard

「The Prodigyでは、Twin PedalシリーズのDD-20 Giga Delayを今でも使用しています。これはRobが何年にもわたって使い続けているペダルと同じものです」

The Prodigyの要となるペダル

The ProdigyのギタリストであるRob HollidayのペダルボードでもBOSSは使われていますか?

The Prodigyでは、Twin PedalシリーズのDD-20 Giga Delayを今でも使用しています。DD-20なしでは彼らの音楽は成り立ちません。これはRobが何年にもわたって使い続けているペダルと同じものですが、彼はこれが確実に動作することを気に入っています。このペダルには非常に長いディレイとオンボード・メモリが搭載されています。私が気に入っている点は、BPMを直接調整できるところです。The Prodigyでは、BPMは常に一定ですね。このペダルは決して故障しませんよ。

また、RobはBOSS NS-1X Noise Suppressorも使用しています。これも素晴らしいペダルです。本当に動作が速くて、ゲートが閉じる音さえ聞こえません。特にメタルコア、デスコア、ハードコア等で使われるチャグ(高速で細かい刻み)とも相性がよく、フィードバックはもちろん、電磁波干渉も全くありません。非常にシンプルなギター・リグです。

「BOSS NS-1X Noise SuppressorはCHUGの音とも相性がよく、フィードバックはもちろん、電磁波干渉も全くありません」

Dime itして、生まれるサウンド

スタジオでは、BOSSのペダルをどのように使用していますか?

スタジオの魅力は、音を思い切り上げられることです。Rich Costeyは「dime it」と表現していましたが、これはアンプやペダルの設定をすべて最大の10にして、どんな音が出るか試してみるという意味です。自宅やライブでは絶対にしないような音量で試すことで、驚くほど素晴らしいサウンドが生まれることがあります。

あなたのペダルボードにはどんなBOSS機材がありますか?  

私のスタジオにペダルボードはありませんが、ペダル棚があります。本棚にペダルを並べておいて、インスピレーションが湧いた時にすぐ手に取れるようにしているんです。BOSSのHM-2W Heavy Metalや30周年記念モデルのMetal Zone、それからDD-3以降のDigital Delayコンパクト・ペダルを全種類揃えています。

Digital Delayシリーズはそれぞれ微妙に違う特性を持っていますが、私のお気に入りはDD-6です。これはSimon Neilが特に気に入っていたモデルで、HOLD機能をよく使っていました。この機能を使って、曲と曲の間でギターを切り替える際の音をうまくカバーしていたんです。

Richard Pratt pedal workshop
Simon Neil's Metal Zone pedals

「スタジオの魅力は、音を思い切り上げられることです。自宅やライブでは絶対にしないような音量で試すことで、驚くほど素晴らしいサウンドが生まれることがあります」

お気に入りのペダル

あなたのお気に入りのBOSSペダルは何ですか?  

私が選ぶなら、Metal Zoneです。大きなアンプを通した時に得られるあの低音は他に代えがたいものがあります。その瞬間に、このペダルの真価が発揮されるんです。本当に素晴らしいです。Simon NeilはMarshallの1959 Plexiアンプを使ってMetal Zoneを鳴らしていますが、アンプの設定はあえて超クリーンにしてあります。

BOSSの名作を復活してほしいと思いますか?

TU-2 Chromatic Tunerの復活はぜひ見届けたいですね。Siがライトの見え方を気に入っているので、ステージではTU-2しか使っていないんです。TU-3がダメというわけではありませんが、これが私のツールボックス事情です。

「レコーディングでは、曲がライブよりも少しきれいに聴こえることがよくあります」

BOSSのペダルはこれで決まり

BOSSペダルのレコーディングで特に好きな瞬間はありますか? 

Nirvanaが初期の作品で使っていたDS-1 Distortionの音は本当に最高です。私の演奏のミスを何度もカバーしてくれています。Biffy Clyroがレコーディングした曲のほとんどにBOSSのペダルを使っています。アルバム『Puzzle』の「Who’s Got a Match? 」のようにディストーションが中くらいかかった音には、SD-1 Super OverDriveを使用しました。常にエフェクトは全開でかける必要はありません。レコーディングではライブよりも少しクリーンなサウンドになることがよくあります。

BOSSのペダルを3台のみ選ぶとしたら?

まずはTU-3 Chromatic Tuner。チューナーなしでは何もできません。それからMetal Zone、DD-6 Digital Delay。これで決まりです。Metal Zoneからはいろいろな音が出せます。DD-6もいろいろと遊べます。私はSHORT DELAY MODEをスラップバックの音に使うのが好きです。

Simon Neil's Metal Zones 3, Credit - Richard Pratt
Simon Neil's Metal Zone pedals, Photo by Richard Pratt

「好みのサウンドを選び、あまりいじりすぎないこと。できる限りシンプルに」

Simon Neil's Metal Zones, Credit - Richard Pratt
Simon Neil's Metal Zone pedals

ディレイを組み合わせた音作り

ゲイン・ペダルを使うときのコツはありますか?  

好みのサウンドを選び、あまりいじりすぎないこと。できるだけシンプルに保つことが大切です。アンプ・モデラー用に何千もの音をダウンロードする必要はあるのでしょうか。それよりも、BOSSペダルを実際のアンプに繋いで、その音を楽しんでみてはどうでしょう。結局、演奏次第でリグの音がクールに聞こえます。

ペダルやアンプ以外にも、音に影響を与える要素はたくさんあります。たとえば、ギター・ピックひとつで音が劇的に変わることがありますし、弦でも音を大きく変えることがあります。細かいディテールにこだわりすぎて、大局を見失ってしまうのは簡単です。細部にのめり込みすぎる人もいますが、一歩引いてこう自問してみてください。「この音はかっこいいだろうか?」と。

ディレイ・ペダルの使い方のヒントはありますか?

Mike Vennartから素晴らしいアドバイスをもらいました。デジタル・ディレイをセットアップして、リピート回数、レベル、ディレイの長さを適切に調整したら、それをアナログ・ディレイに繋げるんです。こうすることで、ディケイがちょっと乱れた、でもとてもクールなサウンドが得られます。つまり、デジタルからアナログへのルートを試してみることです。この方法で得られる音は驚くほど素晴らしいものがありますよ。これがMikeの秘密兵器なんです。

「思い切り楽しんで、大胆にリバーブを使ってください。大きくて力強いステートメントを作るんです」

Mistakes, Myths, and Views

リバーブ・ペダルの使い方に関するヒントはありますか?

リバーブはライブで使うのが少し難しいエフェクトです。大きな会場で演奏する場合、通常は自然なリバーブが十分にあります。それでも使いたいなら、思い切り楽しんで、大胆に使ってみるのが良いと思います。大きくて力強いステートメントを作ることが、とてもクールだと思いますね。特に、リバーブとファズを組み合わせるのが大好きです。

ペダルボードに関して、よくある誤った解釈などはありますか?

トゥルー・バイパスが必ずしも最良の選択とは限りません。場合によっては適していますが、そうでない場合もあります。また、スルー・ホールの半田付けが表面に実装されているPCB設計より優れているという誤解もあります。私の意見では、実際に聞こえる音には全く影響しません。それどころか、表面実装の方が部品の許容範囲が狭いため、一貫性が高いと言えるでしょう。

Richard Pratt and Levi Yarde
Screenshot

「年を取ったら、自分の作業小屋でエフェクト・ペダルを作り続けることが夢です」

Richard Pratt making pedals, Credit - Neil Bedford

Gone Fishing

現在のエフェクト・ペダル市場について、全体的な意見を教えてください。

次のペダルを出したときにお知らせしますよ。Biffy Clyroのペダルをリリースするたびに、約3分で完売してしまいます。文字通り、需要に追いつけないんです。年を取ったら、自分の作業小屋でエフェクト・ペダルを作り続けるのが夢ですね。

Rod Brakes

Rod Brakes

Rod is Brand Storytelling Copywriter, BOSS. His writing has appeared in outlets like Guitar World, Music Radar, Guitar Player, and numerous others. He’s also a lifelong musician.

Simon Neil tosses guitar to Richard Pratt, Credit - Carla Mundy
Previous Story

Behind the Board: Richard Pratt with The Prodigy, RAYE, and Biffy Clyro   

Next Story

Serial GK Partners: FREEDOM CUSTOM GUITAR RESEARCH

Latest from Effects

Janelle Borg – guitars (she/her), Sofia Rosa Cooper – drums (she/they), Leona Farrugia – Vocals (she/they), Leanne Zammit – bass (she/her)

Reverberations:ĠENNのJanelle BorgとLeona Farrugia

創造性、姉妹愛、そしてライブ・パワーがぶつかり合う中で、ĠENN が BOSS ペダルを使用して映画のようなサウンドとアート・ロックのエネルギーをどのように融合させているかを探ります。
Simon Neil tosses guitar to Richard Pratt, Credit - Carla Mundy

Behind the Board: Richard Pratt with The Prodigy, RAYE, and Biffy Clyro   

The effects pedal aficionado shares his top tips on stompboxes and explains how the pros achieve world-class guitar tone. Header photo by Carla Mundy, all other photos Richard Pratt

Hailing from Preston in northwest England, Richard Pratt has lent his rare technical expertise to some of the country’s top performers. His 20-plus years at the cutting edge of live music have seen him work with a medley of high-caliber acts, including RAYE, Biffy Clyro, Kasabian, Oceansize, Cat Burns, Sugababes, Stormzy, and Dave. In recent times, Richard has worked on shows for chart-topping UK grime artist Stormzy and award-winning British rapper Dave. This summer, he is heading out on tour with The Prodigy.  

Rock, dance, rap, or pop—no gig is too challenging, and BOSS pedals are usually somewhere on stage. A self-confessed pedalhead, when Pratt is not on tour, he’s likely at home, soldering iron in hand, building stompboxes. In true boutique style, he makes small, highly collectible batches of pedals as Gone Fishing Effects. His handmade designs include rare signature models for the likes of Kasabian’s Sergio Pizzorno and Biffy Clyro’s Simon Neil.  

Richard Pratt

The Touring Bug

So where did you career as a guitar tech begin?

In the late ’90s/early ’00s, my sister’s band, Fi-Lo Radio, had a bit of a buzz about them, and I insisted I tag along on tour, drive the van, and work the merch stand. Fi-Lo Radio was supporting Oceansize on a UK tour, and after that, I went on the road with Oceansize around Europe. They supported Biffy Clyro, and I just pestered Biffy into giving me a job until they finally relented.

"My sister’s band, Fi-Lo Radio, had a bit of a buzz about them, and I insisted I tag along on tour, drive the van, and work the merch stand."

Stormzy Weather

Which BOSS pedals are on Stormzy  bassist Levi Yarde’s pedalboard?  

Levi’s pedalboard is all BOSS. He uses an OC-5 Octave, BB-1X Bass Driver, BC-1X Bass Comp, NS-2 Noise Suppressor, LS-2 Line Selector, TU-3W Chromatic Tuner, and MS-3 Multi Effects Switcher. It’s straightforward, and Levi knows it’s going to work every time. He used it for three consecutive nights at The O2 arena recently. The Sugababes bassist, Arran Powell, has almost exactly the same pedalboard.  

Stormzy bassist Levi Yarde’s pedalboard
Stormzy bassist Levi Yarde’s pedalboard

"With The Prodigy, we still use the DD-20 Giga Delay from the Twin Pedal series. It’s the same one Rob’s used for years and years."

Prodigous Pedals

Which BOSS pedals feature on The Prodigy guitarist Rob Holliday’s pedalboard?    

With The Prodigy, we still use the DD-20 Giga Delay from the Twin Pedal series. We can’t get away from the DD-20. It’s the same one Rob’s used for years and years, and he knows it just works. It’s got a really long delay and onboard memory. I like it because you can dial in the BPM. And with The Prodigy, the BPM is always going to be the same. This pedal never fails. 

Rob also uses a BOSS NS-1X Noise Suppressor. That’s ace. It’s so fast. You can’t hear it closing. It’s great for chugging guitar sounds. You don’t get any feedback, let alone electromagnetic interference. It’s a very simple guitar rig.  

"The BOSS NS-1X Noise Suppressor is great for chugging guitar sounds. You don’t get any feedback, let alone electromagnetic interference."

Dime It

How have you seen BOSS pedals used in the studio?  

The beauty of being in the studio is you can crank it. Rich Costey would say “dime it,” meaning everything on the amp and pedal maxed to ten, just to see what it sounds like. It can sound incredible cranking things up, which you would never do at home or at a gig.   

What BOSS gear features on your personal pedalboard?   

I don’t have a pedalboard; I have a pedal-shelf! It’s a bookcase with all my pedals lined up so I can grab them when inspiration strikes and experiment. I’ve got the BOSS Waza Craft HM-2W Heavy Metal, the 30th Anniversary Metal Zone, and every one of the Digital Delay compact pedals from the DD-3 onwards.   

The Digital Delays all do something slightly different. My favorite is the DD-6. It’s the one Simon Neil got addicted to—particularly the Hold function. We would use that to mask guitar changes between songs.  

Richard Pratt pedal workshop
Simon Neil's Metal Zone pedals

"The beauty of being in the studio is you can crank it. It can sound incredible cranking things up, which you would never do at home or at a gig."

Playing Favorites

What’s your favorite BOSS pedal of all time?  

I would have to say the Metal Zone. There’s nothing like the low-end you can get from the Metal Zone when going through a big amp. That’s when it comes alive. It’s great. Simon Neil plays it through his Marshall 1959 Plexi amp, which is set super clean.   

Would you like to see any BOSS classics return?  

I’d like to see the TU-2 Chromatic Tuner return. I only use TU-2s on stage for Si because he prefers the way the lights look. I’m not knocking the TU-3, though. That’s what I have in my toolbox.  

"We often find songs end up sounding a bit cleaner on recordings than they do live."

Job Done

What are some of your favorite BOSS pedal moments on record?    

I love the DS-1 Distortion sound on early Nirvana stuff. And it covers up a lot of sins in my playing. We used BOSS pedals on pretty much everything Biffy Clyro recorded. We used the SD-1 Super OverDrive for a medium distortion sound on tracks like “Who’s Got a Match?” from the Puzzle album. It doesn’t have to be full-on all the time, and we often find songs end up sounding a bit cleaner on recordings than they do live.  

Which three pedals would you pick for your desert island BOSS pedalboard and why?  

I would have to start with the TU-3 Chromatic Tuner. You can’t do anything without your tuner. From there, I’d go into a Metal Zone, then a DD-6 Digital Delay. Job done. You can get a lot of different sounds out of the Metal Zone. And the DD-6 does a lot, too. I like using the short delay mode for a cool slapback sound.  

Simon Neil's Metal Zones 3, Credit - Richard Pratt
Simon Neil's Metal Zone pedals

"Pick a cool sound, and don’t mess with it too much. Keep it as simple as possible."

Simon Neil's Metal Zones, Credit - Richard Pratt
Simon Neil's Metal Zone pedals

Delayed Gains

Do you have any tips on using gain pedals?  

Pick a cool sound, and don’t mess with it too much. Keep it as simple as possible. Do you need to download thousands of different sounds for an amp modeler? Why not just plug a BOSS pedal into an actual amp and enjoy it? The way you play will make your rig sound cool.   

There are so many other variables aside from just the pedal and amp. For example, a guitar pick can change your sound dramatically. Strings can change your sound a lot, too. It’s too easy to get bogged down in certain details without seeing the bigger picture. Some people go too far into the minutiae. But take a step back and ask yourself: does it sound cool or not?   

Any tips on using delay pedals?   

Mike Vennart gave me a great tip. Set up a digital delay with the right amount of repeats, level, and length, then run that into an analog delay. You can get some interesting sounds where the decays sound messed up in a really cool way. So, try going digital into analog. The sounds you can get are off the chart. It’s Mike’s secret weapon.  

"If you’re going to use reverb, then go big and have fun with it, I say. Make it a big, bold statement."

Mistakes, Myths, and Views

Do you have any tips on using reverb pedals?  

Reverb can be a tricky one to use live. If you’re playing in a big room, there’s normally plenty of natural reverb anyway. But if you’re going to use it, then go big and have fun with it, I say. Make it a big, bold statement. I think that’s much, much cooler. I particularly love combining reverb with fuzz.  

Have you noticed any common mistakes or myths about pedalboards?  

True bypass isn’t always the best choice. It can be in some circumstances and not in others. There are also misconceptions about through-hole soldering being better than surface-mount PCB designs. It doesn’t make a jot of difference to what you can actually hear, in my opinion. If anything, surface mount produces better component tolerances, meaning it’s more consistent.  

Richard Pratt and Levi Yarde
Richard Pratt and Levi Yarde

"When I’m older, the dream is to be sitting in my shed building effects pedals."

Richard Pratt making pedals, Credit - Neil Bedford

Gone Fishing

What is your overall view on the current state of the effects pedal market?  

I’ll let you know when I put out my next pedal. Every time I release a Biffy Clyro pedal, it sells out in about three minutes. I literally can’t make enough of them. When I’m older, the dream is to be sitting in my shed building effects pedals.

Rod Brakes

Rod Brakes

Rod is Brand Storytelling Copywriter, BOSS. His writing has appeared in outlets like Guitar World, Music Radar, Guitar Player, and numerous others. He’s also a lifelong musician.

Previous Story

Serial GK Partners: ATELIER Z

Simon Neil tosses guitar to Richard Pratt, Credit - Carla Mundy
Next Story

Behind the Board:Richard PrattとThe Prodigy、RAYE、Biffy Clyro

Latest from Pedals

Don't Miss